Deco Magic Lite Permanent-Fusible Non-Woven interlining
Directions for Use:
*Optional - Preparing the fabric to which Deco-Magic® will be applied is a very important step. It is recommended to pre-wash fabrics if at all possible to remove any sizing or starch used in the manufacturing process which may adversely affect the bond. Do not use fabric softener or dryer sheets when laundering. Pre-laundering will also remove any shrinkage and this will aid in producing the most beautiful and durable finish possible.
-
Place the fusible side of Deco-Magic® to wrong side of the fabric.
-
Pressing from the fabric side - Fuse Deco-Magic® to the fabric using a medium/high temperature on the iron (No Steam). Hold the iron in place for at least 3 seconds to set the bond.
-
Let the piece completely cool.
-
Cut or trim to your desired shape or size.
-
If desired, finish by stitching around the shape with your favorite decorative stitch.
**NOTE: All irons heat differently. The iron temperature given above is a starting point. If you find that you are not getting a good fuse, slowly increase your irons temperature until you achieve a good bond.
**Test all fabric for bonding capability before beginning your project.