Sew Fab Foam Single Side Fusible, Fabric Lined Foam 30" x 30"
Directions for Use:
-
Cut Sew-Fab-Foam® to the desired size.
-
Place the shiny fusible side of Sew-Fab-Foam® to the wrong side of fabric.
-
Working from the fabric side, cover with a damp press cloth.
-
Set the iron to a Wool/Steam setting – hold pressure to the damp press cloth for a minimum of 5 seconds.
Repeat until all fabric and foam are fused.
*Important Tips –
-
ALWAYS test your fabric and Sew-Fab-Foam to make sure it is compatible.
-
It is recommended to pre-wash all fabrics to remove any sizing that might interfere with the fusible coating. Do not use fabric softener when pre-washing your fabric to ensure the very best bond.
-
All irons heat differently - The temp given above is a starting point, if you are not achieving a good bond, it may be necessary to slightly increase the iron temp or hold pressure for a bit longer. Test First!
-