Press N Bond No-Sew
**Press N Bond is not recommended for items/fabrics containing Teflon.
Complete the embroidery design or patch and remove any excess stabilizer
Trace or print the reverse image onto the paper side of Press N Bond.
Cut the shape to size.
Fuse Press N Bond to the back of the fabric or embroidery. Use an iron temperature of at least 260° (125°C) and hold pressure for at least 4 seconds.
Once cooled, peel back the release paper which will expose the fusible surface.
Position the patch/emblem or appliqué on the base material and press from the fabric side. Use the same temperature settings used in step 3 and hold the iron in place for 4 seconds in order to melt the adhesive